AB090 series Helical Gearbox
AB090 series Helical Gearbox
High precision helical gearbox features are low speed,high torque.
AB090series Helical GearboxOutline Drawing
Dimension | D1 | D2 | D3 | D4 | D6 | D7 | L1 | L2 | L3 | L4 | L5 | L6 | L7 | L8 | L9 | L10 | C11 | C21 | C31 | C41 | C51 | C61 | C71 | C81 | C91 | C101 | B1 | H1 |
AB090 | 100 | 6.6 | 22 | 80 | M8 1.25P | 116 | 90 | 48 | 10 | 36.5 | 32 | 3 | 8 | 41 | 6 | 16 | 90 | M6 1P | ≤ 24 | 40 | 70 | 5.5 | 90 | 58 | 155 | 13 | 6 | 24.5 |
※1 Length will vary depending on motor.
※2 Bushing will be inserted to adapt to motor shaft.
Gearbox Performance
Frame size | Stage | Ratio | Nominal output torque | Maximum output torque | Emergency stop torque | Nominal input speed | Maximum input speed | Permitted radial load | Permitted axial load |
[Nm] | [Nm] | [Nm] | [rpm] | [rpm] | [N] | [N] | |||
090N | Single | 3 | 130 | 260 | 390 | 4000 | 8000 | 810 | 930 |
4 | 140 | 280 | 420 | 4000 | 8000 | 890 | 1100 | ||
5 | 160 | 320 | 480 | 4000 | 8000 | 960 | 1200 | ||
7 | 140 | 280 | 420 | 4000 | 8000 | 1100 | 1300 | ||
10 | 100 | 200 | 300 | 4000 | 8000 | 1200 | 1300 | ||
Double | 15 | 130 | 260 | 390 | 4000 | 8000 | 1400 | 1300 | |
20 | 140 | 280 | 420 | 4000 | 8000 | 1500 | 1300 | ||
25 | 160 | 320 | 480 | 4000 | 8000 | 1600 | 1300 | ||
30 | 150 | 300 | 450 | 4000 | 8000 | 1700 | 1300 | ||
35 | 140 | 280 | 420 | 4000 | 8000 | 1800 | 1625 | ||
40 | 120 | 240 | 360 | 4000 | 8000 | 1900 | 1625 | ||
50 | 160 | 320 | 480 | 4000 | 8000 | 2100 | 1625 | ||
70 | 140 | 280 | 420 | 4000 | 8000 | 2300 | 1625 | ||
100 | 100 | 200 | 300 | 4000 | 8000 | 2400 | 1625 |
Frame size | Stage | Ratio | Maximun redial load | Maximum axial load | Moment of inertia （≦Ø8） | Moment of inertia （≦Ø14） | Moment of inertia （≦Ø19） | Moment of inertia （≦Ø28） | Noise value |
[N] | [N] | [kgcm²] | [kgcm²] | [kgcm²] | [kgcm²] | dB（A) | |||
090N | Single | 3 | 3250 | 1625 | ─ | 0.68 | 1.1 | 2.9 | 60 |
4 | 3250 | 1625 | ─ | 0.48 | 0.87 | 2.6 | 60 | ||
5 | 3250 | 1625 | ─ | 0.39 | 0.79 | 2.6 | 60 | ||
7 | 3250 | 1625 | ─ | 0.32 | 0.72 | 2.5 | 60 | ||
10 | 3250 | 1625 | ─ | 0.29 | 0.69 | 2.4 | 58 | ||
Double | 15 | 3250 | 1625 | 0.20 | 0.36 | 0.75 | ─ | 60 | |
20 | 3250 | 1625 | 0.19 | 0.35 | 0.74 | ─ | 60 | ||
25 | 3250 | 1625 | 0.19 | 0.35 | 0.73 | ─ | 60 | ||
30 | 3250 | 1625 | 0.12 | 0.28 | 0.67 | ─ | 59 | ||
35 | 3250 | 1625 | 0.18 | 0.34 | 0.73 | ─ | 58 | ||
40 | 3250 | 1625 | 0.11 | 0.27 | 0.67 | ─ | 57 | ||
50 | 3250 | 1625 | 0.11 | 0.27 | 0.67 | ─ | 57 | ||
70 | 3250 | 1625 | 0.11 | 0.27 | 0.67 | ─ | 57 | ||
100 | 3250 | 1625 | 0.11 | 0.27 | 0.67 | ─ | 57 |
Frame size | Stage | Ratio | Precision back （P0） | Precision back （P1） | Standard back （P2） | Efficiency ( η ) | Weight | Temperature | Service life | Protection level |
arcmin | arcmin | arcmin | % | [kg] | °C | hr | ||||
090N | Single | 3~10 | ≤ 1 | ≤ 3 | ≤ 5 | ≥95% | 3.7 | -10°C~+90°C | ≥ 20000 | IP65 |
Double | 15~100 | ≤ 3 | ≤ 5 | ≤ 7 | ≥ 92% | 4.2 |
※1 With nominal input speed，service life is 20,000 hours.
※2 The maximum torque when starting and stopping.
※3 The maximum torque when it receives shock.(up to 1,000 times)
※4 The maximum average input speed.
※5 The maximum momentary input speed.
※6 With this load and nominal input speed, sevice life will be 20,000 hours. (Applied to the output shaft center, at axial load 0)
※7 With this load and nominal input speed, sevice life will be 20,000 hours.(Applied to the output side bearing, at redial load 0)
※8 The maximun redial load the reducer can accept.
※9 The maximum axial load the reducer can accept.
※10 Test conditions: n = 3000 rpm, no load, 50 cm.
※11 The weight may very slightly model to model.
Inquire Now
